75Ω 1: 1 CT Flux Coupled Transformer 0.3-800 MHz

Product Description

Features: 

•DC Current: 30mA Max

•Input Powere: 500mW Max

•260°C Reflow Compatible

•RoHS compliant and lead free

•Operating temperature range: -40℃ to +85℃ 

•Storage temperature range: -55℃ to +100℃ 

The RF balun configuration is recommended for clock frequencies between 125 MHz and 625 MHz, and the RF transformer configuration is recommended for clock frequencies from 10 MHz to 200 MHz. The back-to-back Schottky diodes across the transformer/balun secondary limit clock excursions into the AD6657 to approximately 0.8 V p-p differential. This limit helps to prevent the large voltage swings of the clock from feeding through to other portions of the AD6657 while preserving the fast rise and fall times of the signal that are critical to a low jitter performance.

Application:

• For Motorola Walkie-talkie

• For Car Streaming Media Rearview Mirror.

• For Broadband and Wireless Communications.

• For Wireless Microphone & Marine Comunications.

• For Ldeally Suited LTE, Cellular, UMTS, WiFi, WiMAX. 

• For Differential Modulator/demodulator and Active Mixers.

Communications Diversity radio and smart antenna (MIMO) systems Multimode digital receivers (3G) WCDMA, LTE, CDMA2000 WiMAX, TD-SCDMA I/Q demodulation systems General-purpose software radios!

Product Inquiry

1:1 50Ω 1.8-30MHz low frequency Flux Couped Transformer for Walkie-Talkie,Wireless communication,LTE WIFI application use.

50Ω 1:4 Transmission Line Transformer 2-1000MHz RF Balun Transformer for VHF/UHF,Base station,Antenna and Push-Pull Amplifier use.

50Ω 1:4Transmission Line Transformer 2-1000MHz RF Balun Transformer for VHF/UHF,Base station,Antenna and Push-Pull Amplifier use.

75 Ohm Transformer 1:1 Transmission Line Balun for VHF/UHF And Push-Pull Amplifier Use.

75Ohm 1:1 Ratio RF balun transformer used for 50-1200MHz with 0.25W RF power for DOCSIS 4.0 Amplifer and set top box